FRALIEN 2X700 is a Framed Staple Alien variant designed for the 20700 and 21700 single battery mechanical mods. With 28G N80 frames and 8 ply's of .3n80 ribbon and a 36G Nichrome 80 fuse. 

Core: 8 x 0.3x0.1mm Nichrome 80 Ribbon Wire

Frame: Two Pieces of 28g Nichrome 80

Alien Fuse: 36g Nichrome 80

Wraps: 4

Inner Diameter: 3mm

Single Coil Resistance: 0.16-0.2

Dual Coil Resistance: 0.08-0.1

 Rebuilding is for experienced users only and a knowledge of ohms’ law should be considered when building coils for Rebuildable Atomiser's. The distance of the coils from the post can affect the resistance of the build. Always exercise caution building your atomiser, always check your build’s resistance on an ohm reader before firing it on any device. Coils that are touching any part of the deck, air flow controller or any part of the coil touching any of the atomiser's posts can result in a short and can cause serious damage to your devices if not checked on an ohm reader before use. Make sure to use high drain and high amperage batteries when using advanced user devices.