Staple Coils

$19.95

Quantity

These Staple coils are designed for low to medium power providing excellent flavour production at the sacrifice of wire mass. A great coil for one that not really into high power and would suit a regulated device. With 8 vertically stacked peices of 0.3x0.1mm Nichrome 80 ribbon and fuse wire of 40G Nichrome 80 these coils are flavour machines.

Specs:

Core Wire: 8 Strands of 0.3x0.1 Wire Buddha N80 Ribbon Wire

Fuse Wire: 40g Wire Buddha Nichrome 80

Wraps: 7

Inner Diameter: 3.0mm

Single Coil Resistance: 0.40

Dual Coil Resistance: 0.20

Device recommendation: Single / Dual battery regulated device.

 Do not add Extra wraps on these as they have no frame to keep the ribbon in place, ribbon stack is prone to collapsing if extra wraps added. Please be careful these coils fuse is very thin and can be damaged easily(See Photo)

 

Rebuilding is for experienced users only and a knowledge of ohms’ law should be considered when building coils for Rebuildable Atomizer’s. The distance of the coils from the post can affect the resistance of the build. Always exercise caution building your atomizer, always check your build’s resistance on an ohm reader before firing it on any device. Coils that are touching any part of the deck, air flow controller or any part of the coil touching any of the atomizer’s posts can result in a short and can cause serious damage to your devices if not checked on an ohm reader before use. Make sure to use high drain and high amperage batteries when using advanced user devices.